NOW BETTER THAN CLAY!
Works 3 Times Faster with Advanced Polymer Technology
4″ Foam Pads
FINE GRADE
TWO HEADS ARE BETTER THAN ONE!
NANOSKIN AUTOSCRUB System works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. With either dual action orbital polisher or hand application, it safely and easily removes
paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated
contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you’re ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is
required.*For surface prep., use with NANOSKIN GLIDE Instant Spray Lubricant
*To achieve best result on the paint, use with NANOSKIN NANO SHOCK Hydrophobic
Spray Lubricant Sealant.
*For glass prep. and hydrophilic anti-static sealant, use with RAIN PREP Glass
Cleaner/Activator then follow with RAIN Glass Sealant.
NOTE:
Using with 6″ soft-edge DA pad is highly recommended.
Sufficient lubrication is crucial to the AUTOSCRUB application.
Plain water is NOT an adequate lubricant.
DO NOT use with rotary polisher.
AUTOSCRUB is not solvent resistant.
Remove tar & grease before application
Helpful Tips:
The AUTOSCRUB has a protective coating to ensure stability within transportation.
To break in the pad, moisten the AUTOSCRUB with desired lubricant.
Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam. This is the protective sealant coming off. Don’t use until the polymerized rubber is soft
and slightly tacky.
Cold temperatures may stiffen pad. Warm surface before using.
Total Import Solutions is not responsible for the misuse of this product or if the product is used in any other way than directed.
There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine/advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever.
DIRECTIONS for use
Directions:
Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface over 100°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.
1. Thoroughly wash vehicle free of dust, sand, and dirt.
2. Dilute GLIDE to desired strength. (2 oz. makes 16 oz. RTU.)
3. Mist sufficient GLIDE onto the surface evenly.
4. Polish the surface with dual action orbital polisher using light pressure (Low Speed).
5. Wipe off residue and apply wax or glaze.
Step 1Spray sufficient amount of lubricant on the glass surface. |
Step 2
Slide the Autoscrub across paint or glass surface using a back and forth motion with light to medium pressure. |
Step 3Wipe and buff dry residual lubricant off the glass surface using light pressure. |
TechnicalInfo
Contains:
Coming soon…
Reviews
There are no reviews yet.