RAIN PREP Glass Activator & Cleaner 7:1

NOTE:
Due to its ammonia formula, avoid contact with plastic molding and trims.
DO NOT use on interior tinted glass.

DIRECTIONS for use
Directions:
AUTOSCRUB
• Remove loose dirt on the glass.
• Dilute RAIN PREP to desired strength.
• Mist sufficient RAIN PREP onto the surface evenly.
• Polish the surface with AUTOSCRUB Decontamination product.
• Wipe off residue and apply RAIN Glass Sealant.

NOTE:
Sufficient lubrication is crucial to the AUTOSCRUB application.
Plain water is NOT an adequate lubricant.

Glass Cleaner
• Dilute with water to designed strength.
• Spray or wipe on surface.
• Wipe with a clean dry towel or glass towel for a sparkling clean surface.

TIPS:
All glass cleaners are sensitive to dirty towels. So, if you use a towel that’s previously been used for polishing or waxing, remaining product residue is bound to leach out and smear your glass. Dedicated glass towels are your best bet.

Step 1: Spray a generous amount of Rain Prep on glass surface.	Step 2: With light to medium pressure slide the Autoscrub across the glass surface in a back and forth motion	Step 3: Wipe glass surface clean of residual Rain Prep	Step 4: Apply Rain glass sealant on previously prepared Rain Prep glass surface
Step 5: Wipe glass surface clean of residual Rain glass sealant.

TechnicalInfo
Contains:
Water (CAS#7732-18-5), Isopropyl Alcohol (CAS#67-63-0), Ethanol (CAS#64-17-5), Propylene Glycol n-butyl Ether (CAS#5131-66-8), Polyethylene Glycol (CAS#25322-68-3), Aqua Ammonia (CAS#1336-21-6)

NOTE:
Due to its ammonia formula, avoid contact with plastic molding and trims.
DO NOT use on interior tinted glass.

DIRECTIONS for use
Directions:
AUTOSCRUB
• Remove loose dirt on the glass.
• Dilute RAIN PREP to desired strength.
• Mist sufficient RAIN PREP onto the surface evenly.
• Polish the surface with AUTOSCRUB Decontamination product.
• Wipe off residue and apply RAIN Glass Sealant.

NOTE:
Sufficient lubrication is crucial to the AUTOSCRUB application.
Plain water is NOT an adequate lubricant.

Glass Cleaner
• Dilute with water to designed strength.
• Spray or wipe on surface.
• Wipe with a clean dry towel or glass towel for a sparkling clean surface.

TIPS:
All glass cleaners are sensitive to dirty towels. So, if you use a towel that’s previously been used for polishing or waxing, remaining product residue is bound to leach out and smear your glass. Dedicated glass towels are your best bet.

Step 1: Spray a generous amount of Rain Prep on glass surface.	Step 2: With light to medium pressure slide the Autoscrub across the glass surface in a back and forth motion	Step 3: Wipe glass surface clean of residual Rain Prep	Step 4: Apply Rain glass sealant on previously prepared Rain Prep glass surface
Step 5: Wipe glass surface clean of residual Rain glass sealant.

TechnicalInfo
Contains:
Water (CAS#7732-18-5), Isopropyl Alcohol (CAS#67-63-0), Ethanol (CAS#64-17-5), Propylene Glycol n-butyl Ether (CAS#5131-66-8), Polyethylene Glycol (CAS#25322-68-3), Aqua Ammonia (CAS#1336-21-6)