SawStop Compact Table Saw

The SawStop Compact Table Saw features SawStop’s patented safety system with the mobility you need to work from anywhere – at home or on the job site. With a 10″ blade and durable construction, you’ll have the power and accuracy you need anywhere you go.

Equipped with SawStop’s patented Safety System, the spinning blade stops on contact with skin and drops the blade below the table in less than 5 milliseconds. Need to cut wet wood? Simply use the safety bypass feature so that you do not set off your brake! 

The SawStop CTS is built to last. With a heavy-duty, rigid tube structure and rubber feet, the CTS gives a solid and durable feel and provides the stability you need for smooth cuts on the job site. 

The rack and pinion fence is easy to adjust or remove and is always square. The fence has a built-in high and low shelf to support all types of cuts and has a max rip capacity of 24.5″. Small parts and thin rips can be made from the low fence and when the fence is extended beyond 12″, the low fence can also be dropped down to act as a material support shelf for thin materials.

With the quick-tilt bevel, you can quickly and easily tilt the blade to your ideal angle.  Adjust your bevel setting from a centrally located knob and further fine-tune in 1 degree increments with the micro tilt-adjust feature. 

Dust collection for the CTS is built on a thoughtful internal shroud that directs dust out of the back of the saw through a 2.5″ dust collection port. For additional collection capabilities, simply connect a shop vac or Festool dust extractor with a 2.5″ hose to collect dust and keep a your jobsite or shop clean.

Stay organized with the on-board storage compartment that is mounted to the back of the saw. The wrenches, blade guard and riving knife have a home on the saw so you spend less time searching for your needed tools and parts. 

The compact size, carry handle and on-saw storage mean you have everything you need at hand.  The SawStop CTS comes standard with a SawStop 24-tooth blade and brake cartridge installed.

Note: The Compact Table Saw is not compatible with dado blades.

Optional accessories include: Folding Stand (#CTS-FS) and Zero Clearance Insert (#CTS-TSI)

Specs

Motor: 120 VAC 60 Hz, Universal
Amperage: 15A
No Load RPM: 4,000
Blade: 10″
Max. Depth of Cut, Blade at 0°: 3-1/8″
Max. Depth of Cut, Blade at 45°: 2-1/8″
Max. Rip Capacity: 24-1/2″
Weight: 68 lbs.

Includes

• (1) Compact Table Saw
• (1) Miter Gauge
• (1) Brake Cartridge (installed)
• (1) 3 mm Hex Key
• (2) Blade Wrenches
• (1) Riving Knife (Installed)
• (1) Blade Guard with Spreader & Anti-Kickback Pawls
• (1) 24-Tooth Ripping Blade (Installed)
• (1) Push Stick
• (1) Table Saw Insert (Installed)